How To Remove Links From Sekonda Watch

You should be able to push the pin 2 or 3mm and then pull it out from the other side using your pair of pliers or by hand. It is horrible to look at and I would not recommend anyone to buy from Sekonda again.

How To Remove Watch Links 5 Steps With Pictures Instructables

Is your model not on the list.

How to remove links from sekonda watch. Removing The Old Battery. If in doubt post a photo or two. The watch is great at the price point the LCD screen doesnt bother me at all.

You need to find what movement is actually being used inside to source the correct stem. The back was easily prised off with a penknife. Sekonda Brand History.

However if it is a cheaper variety then you should be able to prise the back off with a jewellers screwdriver set. Opening The Back of The Watch. Its usually just a case of removing the winder stem then the movement will come out.

If your Sekonda watch is a high value item then it is best to take to a jewellers. Remove one link from each side with each adjustment rather than all links from one side. 3101 will just be Sekondas model number.

Sekonda although a British watch brand has its toots in two of the oldest watch factories in Russia. The Soviets first manufacturer of watches and movements the First State Watch Factory that was established in 1930. When it is completely removed depending on the bracelet type a small metal ferrule that was in the middle of the joining link may be released.

How to Remove Watch Links Step 1. This will help prevent the band from becoming lopsided in appearance. How to remove links from a metal watch band strap - step by stepUsing regular items around the home Paperclip and finger nail cutter.

Manuals for Sekonda Watches. And to Russias oldest factory the Petrodvorets Watch Factory that was established in 1721. The only thing that is a serious let down is the back of the watch has dozens of scratch marks on it where the sensor is.

To remove a link in your watch band you must first locate where to remove the link and. It should be on the movement somewhere. Just remember to do it carefully as to not lose any pieces as without the pins will not be able to put it back together.

Insert the end into the gap on the underside of the watch strap and push the splint outwards as shown in the picture above. Watch pins hold the links of a watch bracelet together. Since youre going to have to open the watch anyway to replace the stem do this now to suss the movement ID.

Remove links from the buckle or clasp first rather then from the end of the watchband that was connected to the watch lugs. Apply gentle pressure and gently push away until you feel the spring bar release the strap from the watch. Repeat this process for each of the links youd like to remove rememebering that only ones with arrows can be removed.

Locate the Link Pins. Hi All though Ive not had any experience with Sekondas you dont usually need any special tools to extract a watch movement. This spring bar when in place extends to hold the strap in place releasing that pressure allows for you to remove the spring bar.

Find the small opening on the side of the first link you want to remove. Remove the First Pin. It seems like Ive been given a used watch.

Below you can find all models Sekonda Watches for which we have manuals available. Also view the frequenty asked questions at the bottom of the page for useful tips about your product. You can use a flat head screw driver or a paperclip at your own risk.

The main tools required are some small screwdrivers and tweezers. The picture below shows the watch open. Use a pair of pliers to pull it out fully.

I remember when I had a penknife with a special blade curved and not sharp especially to remove watch backs The watch back has a notch at one end so you can get a blade under it. Only the three or four links on each size of the clasp have pins that can be removed. Most watches will have up to three pins that may be removed on each side.

These Russian watch manufacturers. With a small pin hammer and a pin or thin nail you can tap the bars out of the watch in the direction indicated by arrows on the inside on the watch strap and re tap them in once you have removed the correct number of links. To remove the stem you have to press what appears to be a metal stud located.

If you want to resize your Tissot watch band youll need to remove pins to either remove a link making the band smaller or add a link making it larger. Also the same applies if it is waterproof. Slide a pushpin into the opening of that link until the pin holding the band in place sticks out of the.

Before doing so get a magnifying glass out to check there is no grovve or recess.

How To Remove T Bar Watch Band Links Youtube